GuidePedia

0

How to Be Safe Around Computers when Repairing: 9 Steps



When trying to fix a computer, you would take it apart and find the problem. It doesn't work like that. You may get electrocuted from exiting power that was left over in the computer. Try out this guide to be safe when working on a computer.



Steps


1. Shut down the computer.

2. Wait for a faint shut down sound that signals you that the computer has completely powered down.

3. Unplug the computer from the power cable that leads to the wall.

4. Take all peripherals out of the ports.

5. Before opening the computer, ground yourself. Touch anything that is metal and on the floor. You wouldn't want to get shocked or ruin your computer when you are inside it.

6. Remove the cover off the computer to reveal the inner working.

7. Unscrew the power block from the tower and remove.

8. Take any magnifying glass and look over the circuits. You may have to take it to a professional if a circuit is broken.

9. If you know a broken circuit isn't the cause, look at other parts of the computer.



Tips

  • When choosing your tools, don't choose anything with a magnetic tip. It may erase your hard drive.
  • If you have an old computer that you have been using, you won't get that faint sound. Wait about 30 seconds for it to shut down.
  • When removing the cover, it may have screws that keep it in place or push buttons. You won't need a tool if it's push buttons.
  • Be careful when you unscrew that power block, it may still hold a charge or be really hot. Have a rubber mat or rubber soled shoes so you are not grounded.



Warnings

  • Never work on a computer while it's still plugged in. Sure it is convenient to see if you got the problem fixed, but you have increased your chances of frying yourself.



Post a Comment Blogger

 
Top