How to Do a $10 Police Flashlight Hack: 8 Steps

How to Do a $10 Police Flashlight Hack: 8 Steps

Here is how to make a powerful flash light for under $10.



Steps


1. Gather everything listed in "Things You'll Need".

2. Pop the batteries out of the case. They won't be used.

3. Unscrew the top and remove the original factory bulb.

4. Replace it with a Krypton flashlight lamp.

5. Go ahead and install the Krypton bulb into the housing.

6. Look inside the flashlight. You'll see some ridges that keep the battery tight. Well, these ridges have to go. You can use a file, or a 5 inch drill bit.

7. Install the 3 batteries.

8. Close it all up, and you're done!



Tips

• For the best results, use the flashlight at night on a cold night.
• Try doing this over the weekend so it does not interfere with your school or job.
• If your flashlight does not work, try reconnecting your light bulb into the housing.

Warnings

• NEVER make any connections if you are not sure what will happen.
• Always have an adult's supervision when making anything that involves electricity.
• NEVER plug any wires into an electrical outlet because it may short circuit the connections!