GuidePedia

0

How to Configure DHCP on Huawei MA5680T: 27 Steps



How to configure DHCP on Huawei MA5680T, seven steps. Configration result: The computer can obtain the dynamic IP address, and access to Internet network. More information about MA5680T,visit www.huanetwork.com.



Steps


1. Step 1 Select DHCP forwarding mode.

2. Huawei (config) #dhcp mode layer-3 standard

3. Step 2 Create DHCP server group.

4. Huawei (config) #dhcp-server 1 IP 10.1.1.1 10.1.1.2

5. Step 3 Select DHCP server mode.

6. Here the system default DHCP server work mode (load sharing mode), no configuration is necessary.

7. Explain

8. Please refer to the specific configuration of DHCP server mode: "DHCP Server 10.6 configuration mode".

9. Step 4 Configure the VLAN uplink port and service virtual port.

10. Huawei (config) #vlan 2 smart

11. Huawei (config) #port VLAN 2 0/19 0

12. Huawei (config) #interface giu 0/19

13. Huawei (config-if-giu-0/19) #native-vlan 0 VLAN 2

14. Huawei (config-if-giu-0/19) #quit

15. Huawei (config) #service-port VLAN 2 GPON 0/2/0 gemport 128 multi-service user-vlan

16. rx-cttr 5 tx-cttr 5

17. Huawei (config) #service-port VLAN 2 GPON 0/2/0 gemport 129 multi-service user-vlan

18. rx-cttr 5 tx-cttr 5

19. Step 5 Configure VLAN three layer interface IP address.

20. Huawei (config) #interface vlanif 2

21. Huawei (config-if-vlanif2) #ip address 2.2.2.1 24

22. Step 6 Binding interface and DHCP server group.

23. Huawei (config-if-vlanif2) #dhcp-server 1

24. Step 7 Save the data.

25. Huawei (config-if-vlanif2) #quit

26. Huawei (config) #save

27. Ending



Tips

  • Configration result:
  • The computer can obtain the dynamic IP address, and access to Internet network.
  • MA5680T DHCP Relay function figure

Post a Comment Blogger

 
Top